Double Door for Panama198L off Grid 12V/24V DC Fridges Solar Upright Refrigerators

Product Description

 

Total Capacity	198L/7 Cu.ft
Capacity of Cooling Cabinet	118L/4.2 Cu.ft
Capacity of Freezer Cabinet	80L/2.8 Cu.ft
Temperature Range Cooling	0-10ºC;
Temperature Range Freezing	≤-20ºC
Input Voltage	12/24V
Refrigerant	R134a
Power Consumption	78 W
Defrost	Manual
External Dimensions	520*550*1515mm  /  20-1/2 x 21-21/32 x 59-21/32 IN
Net Weight	42kg / 92.6 LB
Type of Compressor	DC

OPERATION
Starting the Appliance
If the refrigerator has been transported on its side, allow 3 hours before applying power. This provides time for any oil trapped in the cylinder to settle back into the oil sump. Once ready, connect the 12 or 24 VDC power source and the refrigerator will automatically turn on within about 1 minute. The freezer compartment will cool first and reach below freezing temperature within 1 hour. The refrigerator (fresh food) compartment might take up to 4 hours to reach proper temperature, depending on ambient conditions. The refrigerator might cycle on and off during this initial cool down period, this is normal.
Temperature Control
The temperature is automatically controlled by a mechanical thermostat. No user adjustment is necessary or possible. The refrigerator will automatically maintain temperature within the limits in the table below as long as the ambient temperature is between 60 & 90F (16 & 32C). Insertions of large warm food loads will temporarily result in higher temperatures.


Loading
A battery-powered refrigeration appliance has a cooling capacity lower than typical AC units. Because the compressor is small, the unit runs more efficiently, but lacks the ability to cool large, warm loads quickly. Keeping a gallon or two of water in the refrigerator can help cool large loads quicker. It will also help to cool your food quicker if your food is packaged in smaller containers rather than large ones. Food packages more than 2 inches thick will cool slowly. Avoid placing warm foodstuff in contact with cold foodstuff.
This appliance is designed for domestic use only! Specifically for the storage of food and drinks (foodstuff). It is not intended for commercial or industrial use. Do not store any poisonous items in the refrigerator, or flammable items near the refrigerator.
Cleaning
If there is any chance of spilling liquid on an electrical component, it is recommended to disconnect the refrigerator from the electrical power supply. Wash the cabinet with warm water and a mild soap or detergent. Do not use abrasive or corrosive cleaning agents, chemical cleaning agents, steel wool or scouring sponges to complete this task as it may cause damage to the surfaces.
Defrosting
The freezer compartment will become progressively covered with frost. When the ice becomes very thick on the inner liner (>1"), complete defrosting should be carried out. Never use sharp metal tools to scrape or chip off frost from the interior compartment as this could damage the appliance beyond repair. Do not use heat sources, such as electric or gas heaters to complete the defrost process.
To carry out complete defrosting:
1. Disconnect the appliance from the electrical supply.
2. Have several dry towels or sponges and a bucket ready to collect the melting ice.
3. Remove any stored frozen food and store in refrigerator compartment or in a cooler, or wrap in several layers of newspaper and store in a cool place.
4. Use a fan and/or warm moist towel to melt the ice in the freezer compartment. Do not use a sharp object like an ice pick. Leave the refrigerator door closed
5. When defrosting is complete, wash and dry the interior thoroughly.
6. Reconnect the appliance to the electrical supply and leave running (while empty) for 1 hour or until the internal freezer temperature is below -5C.
7. Replace the previously removed foodstuff.
Replacing light bulb
1 Disconnect the appliance from the electrical power supply. 6
2 Remove the plastic light cover by sliding it back towards the rear of the cabinet.
3 Replace with a new bulb (max 5 Watt) and replace plastic light cover
4 Reconnect to the electrical power supply.
NOTE: All units are shipped with a LED light which automatically works for both 12 or 24V systems.
At the end of the appliance life
When disposing of your appliance, use an authorized disposal site.The refrigerant must be completely drained and collected by an authorized technician for recycling prior to disposal. Check with your local Environmental Agency for recommendations on recycling this appliance in your area. Remove the electrical connection wiring and also ensure that the door is removed to prevent young children from playing inside and potentially suffocating.
Energy Saving Advice
Install the appliance in a cool location in the house and avoid exposure of the appliance to direct sunlight.
Allow adequate spacing around the rear of the cabinet for air circulation (3in. or 7.5cm) Avoid unnecessary frosting in the cabinet by packing all food and liquids in airtight packages or containers. Minimize the time and frequency of door opening. Ensure there are no obstructions preventing the doors from closing properly and forming a tight seal.




Additional Information

Packing Dimensions : 22.05x 23.62 x 61.22 in 
Gross Weight : 103.6 LB


Q&A
Q: Can I use this unit at home on an AC (alternating current) input power socket?
    Yes, you can, however you will need an AC/ DC adapter. Please purchase this if you do not already have one.
Q:what specification solar panels and batteries need to be configured for this unit ?
   Please contact distributor or local service counter.

Q:Does this unit have a handle?
    Yes, but it needs to be installed the handle after receiving this unit.

To operate per day, this unit requires mono/poly solar panels, battery and a solar charge controller . please order solar system separately and Easy installation by an electrician.




If there is no solar panel and battery on your side, Also you could order adapter separately and easy to use as the diagram showed.